QOS config 4500 switchport for Lightweight access point

[wleppens82]

What is the best QOS configuration what needs to be applied on a 4500 switchport for Lightweight access point.

[Leo Laohoo]

I'd recommend you leave switchport QoS at default.  

[abwahid]

Hi,

If you are asking about Layer 2 QoS configuration for switch-port then it is global command, which will apply on all switch-ports, not for any specific switch-port. 

As far as switch-port mode is concern which in connected to LWAP then yes it is better you keep it in default mode.