Recover from corrupt IOS Image on 1230

[adieball]

Hi

is there a way to recover from a corrupt IOS Image after upgrade von 12.0.8 to 12.0.11 on a 1230?

I get the following and need to recover or send the image again into flash.

---cut---

Loading "flash:/c1200-k9w7-mx.122-11.JA/c1200-k9w7-mx.122-11.JA"...###############################################################################################################################################################################################################################################################################################

bad mzip file, uncompressed to wrong length , (0x65efd6 != 0x65efe8)

Error loading "flash:/c1200-k9w7-mx.122-11.JA/c1200-k9w7-mx.122-11.JA"

Interrupt within 5 seconds to abort boot process.

Boot process failed...

The system is unable to boot automatically. The BOOT

environment variable needs to be set to a bootable

image.

C1200 Boot Loader (C1200-BOOT-M) Version 12.2(8)JA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Compiled Wed 12-Feb-03 15:23 by hqluong

ap: ?

---cut---

any help is highley appreciated.

Rgds.

Andre

[sbilgi]

You can use Xmodem to reload the IOS image on to the wireless device also. I think the procedure is same in all the APs.

http://www.cisco.com/warp/public/102/wlan/ap-fw-upgrade.shtml

The following link might be also of use for you:

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo1200/accsspts/b1228ja/b1228icg/bicgmfw.htm