I have been searching for a while but with no findings i will try to ask myself, is it possible to schedule a reboot of a single Access Point that is connected to a WLC?
The only thing that i find is to reset all AP's with the comand reset-aps.
Does anyone knows if it is possible?
Thanks for the help!
to immediately reset an AP you can use
config ap reset <ap>
If you want to schedule a reboot at a specific, you could use a scheduled task on PI, write a small script to reset the AP by cron/SNMP or use EEM on the switch to shutdown/no shutdown the port of the AP at a specific time.
Can do this 2 ways:
Prime Infrastructure Scheduled task
Script to run the command via the WLC CLI
Could you please help us know how we can schedule through prime infrastructure.
and also the script if we have to reboot multiple ap's.
Remote into the AP and issue the command "reload AT <TIME>".
WARNING: WLC firmware 126.96.36.199 has a bug with the "reload at" and/or "reload in". When the command is used, the AP will reboot immediately (refer to CSCvk55805).