Solved: Re: Seguridad WEP en Cisco Mobility Express

mirojasveliz · ‎07-29-2022

Buenas, actualmente estoy con la versión 8.10.151.0 y no me da la opción de configurar WEP. ¿existe compatibilidad en alguna versión de Mobility Express con autenticación WEP?.

Hi, I'm currently running version 8.10.151.0 and it doesn't give me the option to configure WEP. Does any version of Mobility Express support WEP authentication?

Mark Elsen · ‎07-29-2022

- FYI : https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/89/cmd_ref/me_cr_book-89/me_wlan_cli.html#wp1930990902

M.

-- Let everything happen to you
   Beauty and terror
      Just keep going
     No feeling is final
Reiner Maria Rilke (1899)

View solution in original post

Mark Elsen · ‎07-29-2022

- FYI : https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/89/cmd_ref/me_cr_book-89/me_wlan_cli.html#wp1930990902

M.

-- Let everything happen to you
   Beauty and terror
      Just keep going
     No feeling is final
Reiner Maria Rilke (1899)

Rich R · ‎08-01-2022

WEP is not supported on the Wave 2 APs:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn82mr4.html#pgfId-1492976

If you have devices which are so old that they don't support WPA then use an open SSID (WEP is not secure anyway) with some other means of user authentication after they've associated.

------------------------------
Please click Helpful if this post helped you and Accept as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390