03-07-2018 08:20 AM - edited 07-05-2021 08:21 AM
Hi All,
Is it possible to set 2.4 GHz band coverage at a less than range 20Ft?
03-07-2018 09:27 AM
Hi
You can limit the coverage as much as you can. What you can´t do is extend the coverage too much.
There are more then one approach to reduce coverage: Lower the Access Points power, implement RX-SOP or use Optimized Roaming.
Lower Access Points allows you to physically reduce signal propagation whilst the other technique you do this logically.
If you are asking something different, please, let me know.
-If I helped you somehow, please, rate it as useful.-
03-07-2018 10:06 PM
Thank you Flavio,
lower the access points power may reduce the signalling for both radios, RX-SOP and use Optimized Roaming are global configuration which may affect all the APs, My scenario is only two Aps dot 0 radio coverage needs to be limited.
Regards,
Syed
03-07-2018 11:16 PM
You can lower the power for radio. Optimized roaming can be applied per RF profile.
-If I helped you somehow, please, rate it as useful.-
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide