cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
532
Views
0
Helpful
6
Replies

setting up guest vlan

musumani.woods
Level 1
Level 1

I have a 4400 controller and 10 1250 access points all being controlled via the controller.

I already have an ssid using 802.1x encryption. I need to setup a guest ssid but I cannot seem to find the right documentation related to my controller.

Can anyone help

6 Replies 6

andrew.prince
Level 10
Level 10

Musumani,

What version of software are you running on your WLC?

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807810d1.shtml

Look through that, it gives ACL examples for guest networks. This also assumes' that you have the correct trunking on the switches, VLAN interfaces on the WLC and everything else in the SSID side. This also assumes that the design is solid as well.

First, what are you trying to achieve with the guest network. Do you want a webauth page, open encryption.....

-Scott
*** Please rate helpful posts ***

webauth page

4.2.61.0

For the version of software you are using, below is the configuration guide, it has everything you need:-

http://www.cisco.com/en/US/docs/wireless/controller/4.2/configuration/guide/ccfig42.html

HTH.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: