11-21-2013 08:35 AM - edited 07-04-2021 01:18 AM
Is it possible to enable snmp on APs?
Solved! Go to Solution.
11-21-2013 08:09 PM
Are these AP joined to a WLC? If they are, hen no. If they are not, then yes
Steve
Sent from Cisco Technical Support iPad App
11-21-2013 08:41 AM
HI,
configure the Simple Network Management Protocol (SNMP) on access point.
http://www.cisco.com/en/US/docs/wireless/access_point/12.2_15_JA/configuration/guide/s15snmp.html
Hope it helps.
Regards
Dont forget to rate helpful posts.
11-21-2013 03:46 PM
yes you can enable SNMP
11-21-2013 08:09 PM
Are these AP joined to a WLC? If they are, hen no. If they are not, then yes
Steve
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide