cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
500
Views
5
Helpful
2
Replies
zshowip
Beginner

Some of feature in Policy at C9800 wlc

Hi, I am not very clear about some of feature in Policy at C9800 WLC. Please see the below where i red-labeled them. If we do not check these box, what would happen? In Accounting List, default is empty. but we can choose "default". Thank you

 

1.PNG

 

2.PNG

1 ACCEPTED SOLUTION

Accepted Solutions
Rasika Nayanajith
VIP Mentor

Nothing will happen (if you uncheck). The first setting is for device profiling (RADIUS, HTTP, DHCP). Please see the below post to understand what it does when you enable it

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/215661-in-depth-look-into-client-profiling-on-9.html 

 

The second setting is about Accounting list creation. If you use 17.6.x, you can use the WLAN wizard to create WLANs and it will automatically create those configs in the backend for you. Then you do not want to worry about individual settings.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-6/config-guide/b_wl_17_6_cg/m_acct_ewlc.html 

 

HTH

Rasika

*** Pls rate all helpful responses ***

View solution in original post

2 REPLIES 2
Rasika Nayanajith
VIP Mentor

Nothing will happen (if you uncheck). The first setting is for device profiling (RADIUS, HTTP, DHCP). Please see the below post to understand what it does when you enable it

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/215661-in-depth-look-into-client-profiling-on-9.html 

 

The second setting is about Accounting list creation. If you use 17.6.x, you can use the WLAN wizard to create WLANs and it will automatically create those configs in the backend for you. Then you do not want to worry about individual settings.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-6/config-guide/b_wl_17_6_cg/m_acct_ewlc.html 

 

HTH

Rasika

*** Pls rate all helpful responses ***

View solution in original post

zshowip
Beginner

Thank you Rasika!

Create
Recognize Your Peers
Content for Community-Ad