Spectrum expert Real Time FFT only displays channels 36 - 64

[tdennehy]

I recently discovered that the Cisco Spectrum Expert software is only displaying channels 36 to 64 on the Real Time FFT graph.  I have gone over all the settings, and the UNII-3 channels are selected, but they don't show up.

Does anyone know of any tricks to show channels 149 to 165?

Thanks in advance!

[Scott Fella]

Can you post a screen shot. You need to open another chart.

Thanks,

Scott Fella

Sent from my iPhone

[tdennehy]

Here she is!

[Scott Fella]

If you click on the top left chart, on the Control Panel on the left, you should be able to change the band to view the other 5ghz channel. You will not be able to see all channel in one chart. IIRC, you can choose 3 different bands.

Sent from Cisco Technical Support iPhone App

[tdennehy]

Bingo! You hit it right on the money. Not sure why they wrote the program like that without the little dropdown arrow until you actually go and click on the band - and then the dropdown arrow appears. It darn sure wasn't obvious to me yesterday.

Thanks again for your help!

[Scott Fella · Accepted solution]

Glad you got it working.

Sent from Cisco Technical Support iPhone App