SSH to AIR-LAP1131AG

[Trond Sandodden]

Hi,

Since i upgraded my wlc controllers to 7.6.100 i can't ssh to my old AIR-LAP1131AG ap's.

It  worked fine when running 7.5.102.

By default config i disable telnet and ssh, but enable it via CPI when needed.

If i have a site with one AIR-LAP1131AG, one AIR-LAP1142N and one AIR-CAP1602I and i enable ssh on all of them i can ssh to the 1142 and the 1602, but not 1131

I have tried to override globale username/password without any luck

Does anyone have a idea what's wrong ?

Cisco Prime Infrastructure - 1.4.0.45

Cisco WLC 5508 - 7.6.100.0

[Scott Fella]

Try to disable ssh on that AP and enable it... I had no issue with an 1131 when I was testing it out on v7.6 beta

config ap ssh disable

config ap ssh enable

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

[Trond Sandodden]

Thanks for you reply.

I tried to disable and enable from the wlc, but the result is the same : Connection refused

[Sandeep Choudhary]

did you enable ssh and telnet form WLC for specific AP:

Just correct it . if you did not select the boxes.:

Regards

Dont forget to rate helpful posts

[Trond Sandodden]

Yes, i*ve tried both from gui and CLI.

I can't se any difference from the 1131 and the other ap's, but it still doesn't work

[Scott Fella]

Can you telnet to the AP? The only other thing you can do is to factory reset the AP to see if that fixes it. The certificate is probably bad.

Sent from Cisco Technical Support iPhone App

[Trond Sandodden]

Factory reset didn't seem to help me.

I see that Cisco released a new version last week, 7.6.110

Does anyone know if this is a fix ?

[Scott Fella]

Just tested it out..... Cisco must of did something, becasue it sure does not work for telnet or ssh.  I'll ask them:)

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

[vonglow1818]

hi,

   I have a save question.

   my WLC is 5508, the version is 7.6.100.0. i have four type AP(1131、1262、1602、1242) in the wireless network。

  1131 1242 are not telnet.  1262、1602 is telnet.

[vonglow1818]

I also have a same problem, if you solve this problem, please tell me the solution, thank you!

vonglow@126.com