As i configure on the attachment . the three LAP register successfully on the controller .the problems :
1 - users who access EAMCO-core and Guest-Core , access successfully and gets IP but users who access EAMCO-Dist and Guest-Dist can't get IP
" i think the problem because Dynamic interface cant reach to its gateway because L3 network sperate between them "
2- All four WLAN appear on the three LAP but i want EAMCO-core and Guest-Core appear on LAP2 and LAP3 and the other two WLAN appear on LAP1
3-How i make specific mac address who access the LAP and other blocked
4- make password for user who access LAP by WPA security " i found it in the WLAN , security tab but i don't know where i wirte the key "
As per your query i can suggest you the following solution-
This sequence of events must occur in order for an LAP to register to a WLC:
For more information please refer to the link-
Hope this will help you.
Dear friend ,
i dont have any problem in the registeration . as i said the three LAP register successfully , the problem that i want every LAP support two SSID with different subnet .
The feature that allows you to do this is called ap groups. Here is a link to a config example
Sent from Cisco Technical Support iPad App
that is not my main problem . my main problem that user who want to access LAP1 ( EAMCO-dist or Guest-Dist ) can't get ip and controller can't ping to 18.104.22.168 or 22.214.171.124