11-11-2016 03:27 PM - edited 07-05-2021 06:06 AM
How do i create SSID that ONLY broadcast 5Ghz band? From WLC>WLAN>ssid>radio_policy has several options: all, a only, a/g only, g only, b/g only.
- Is this where I'm choosing option for 5Ghz only?
- which option should I choose?
- There 's no document that described these options' characteristic. e.g. does a-only included a, ac, and n? what's a/g encompassed?
11-11-2016 04:34 PM
There 's no document that described these options' characteristic. e.g. does a-only included a, ac, and n? what's a/g encompassed?
Choose "a only" means 802.11a radio. This also means 802.11a/n/ac protocol. Otherwise, create an AP Group and an RF Group. Under the RF Group, create a new profile with all the 802.11b data rates disabled. Attach/apply this RF Group into your AP Group.
11-17-2016 10:01 AM
Thanks Leo for your response. Just follow up : so what's a/g mean? does it mean a/ac/n and g?
11-17-2016 01:35 PM
so what's a/g mean?
Radio 802.11a and data rates for 802.11a, 20 Mhz channel width.
Radio 802.11b but only 802.11g data rates.
Kindly do not forget to rate our useful posts.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: