Re: Staging Cisco 3802i Aps (5000)!

saboodi · ‎02-11-2019

Hello,

I got 5000 of 3802i Aps, I would like to stage them with static ip add and WLC ip add also.

is there is any tools can help me to make my work faster with out console each one and push the configuration on it??

Thanks,

marce1000 · ‎02-11-2019

- Use DHCP for address assignment if at all possible.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Haydn Andrews · ‎02-11-2019

DHCP for the IP side of things. This can also be used for assigning the WLC via option 43.

If your looking to configure static primary/ secondary controllers, set the AP name, AP mode then you could use APIC-EM to stage the APs using the PNP process.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-4/b_wireless_plug_and_play_deployment_guide.html

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***