Beginning of Crash File: mwar_dump2.crash
--------------------------------------------------------
Dumping registers
CPU Registers:
$ 0 : 00000000 1000cce1 3aaa07b0 00000000
$ 4 : 3aaa07e2 00000000 00000002 3aaa07e2
$ 8 : 00000000 00000000 000f87bb 0000be6c
$12 : 81010100 7efefeff 00000000 2b3fb578
$16 : 176391e8 00000000 1763921c 00020000
$20 : 00000038 105f1014 15141808 00020000
$24 : 8711c1f9 126cb6f0
$28 : 13ea449c 3aaa07a0 13410000 105f0704
Hi : 003e1eec
Lo : 000f87bb
Stack :
00000000 1763921c 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 2b261520 00000000 13420000
00000000 13ea449c 00000000 10e6bac4
00000000 15e90000 00000000 2b62e7ac
00000000 1a095080 00000000 13ea449c
3aaa07b0 13ea449c 00000000 00000000
00000000 000000d9 00000000 13ed449c
00000000 113fb328 00000000 3aaa0ed0
00000000 176391e8 00000000 00000000
00000000 13530000 00000000 15141808
00000000 13ea449c 00000000 176391e8
00000000 105f1014 00000000 105f0ffc
00000000 13ea449c 00000000 10e64b58
************************************************************
* Start Cisco Crash Handler *
************************************************************
Sys Name: *******-WLC2500
Model: AIR-CT2504-K9
Version: 8.0.120.0
Timestamp: Tue Nov 24 07:36:14 2015
SystemUpTime: 11 days 21 hrs 55 mins 52 secs
signal: 11
pid: 831
TID: 984224576
Task Name: spamApTask5
Reason: System Crash
si_signo: 11
si_errno: 0
si_code: 1
si_addr: 0xa4
timer tcb: 0x832
timer cb: 0x10265a18 ('Unknown')
timer arg1: 0x0
timer arg2: 0x0
Long time taken timer call back inforamtion:
Time Stamp: Tue Nov 17 17:00:25 2015
timer cb : 0x1026dda8('Unknown')
Duration : 982713 usecs, cbCount= 4
------------------------------------------------------------
Analysis of Failure:
Software Failed on instruction at :
pc = 0x105f0704 (Unknown), ra = 0x105f0704 (Unknown)
Software Failed while accessing the data located at :0xa4
------------------------------------------------------------
System Stack
0x10013f1c 0x10012d14 0x10008188 0x3aaa0470
0x105f0704 0x105f1014 0x113fb328 0x10e71ff8
0x1267a240 0x126f1ebc
Has happened three times since the upgrade to 8.0.120.0, any ideas as to why?
Regards
Elliot
