turning on netflow on a wlc 5508?

[dallen00111111]

Where is the best place in the config file to turn on netflow on a 5508 wireless controller?  Which template will it export v5 or v9?

[Rasika Nayanajith]

Refer below. It was not standard netflow back in the days (I used 7.4 .x codes that time) & you had to use Cisco supported netflow collector (Scrutinizer supported it)

https://mrncciew.com/2013/02/13/who-really-support-wlc-netflow/

https://mrncciew.com/2013/02/12/configuring-netflow-on-wlc-7-4/

HTH

Rasika

*** Pls rate all useful responses ***

[dallen00111111]

Rasika,

Thanks for the information. and the excellent write-ups you did in the referenced articles. It should be helpful.

Doug

[Rasika Nayanajith]

Thank you Doug..