05-17-2022 12:01 AM
I am not able to join computers with static IP to SSID anymore using PSK. Everything was working fine until I ran into a power outage and WLCs restarted. When I try to join I am getting cannot connect to the network. When I looked at the logs it says:
03.988: %SESSION_MGR-5-FAIL: Chassis 2 R0/0: wncd: Authorization failed or unapplied for client (0020.a6fc.b9b7) on Interface capwap_90000003 AuditSessionID 2800000A000003D249E1A86C. Failure Reason: VLAN Failure. Failed attribute name Vlan310.
Any suggestions on fix ? Thanks
Solved! Go to Solution.
05-17-2022 12:04 AM
check if that related to this bug.
https://quickview.cloudapps.cisco.com/quickview/bug/CSCvn48234
05-17-2022 12:04 AM
check if that related to this bug.
https://quickview.cloudapps.cisco.com/quickview/bug/CSCvn48234
05-17-2022 08:31 AM
Hi Kasun
Thanks I changed vlan to 310 instead of Vlan310 under policy profile. Issue is fixed.
Appreciate your help. Its definitely a bug in 9800 IOS
05-27-2022 03:55 AM
Actually if you read the bug notes this is by design which is why the bug is terminated (will not be fixed).
For Flex you're expected to use the vlan ID or define the name in the flex profile.
05-17-2022 03:36 AM
Hi
Make sure the WLC did not lost any configuration.
On the doc below, look the section "Configuring Static IP Client Mobility (CLI)"
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg.pdf
Configuring Static IP Client Mobility (GUI)
Procedure
Step 1 Choose Configuration > Tags & Profiles > Policy.
Step 2 On the Policy page, click the policy profile name or click Add to create a new one.
Step 3 Click the Mobility tab.
Step 4 Set the Static IP Mobility field to Enabled state.
Step 5 Click Update & Apply to Device.
05-17-2022 03:50 AM
- Flavio made a relevant remark about the correctness of the current configuration ; in that context always useful is CLI : show tech wireless , have the output processed by https://cway.cisco.com/tools/WirelessAnalyzer/ , besides the current issue you will also get lots of other advisories.
M.
05-17-2022 08:32 AM
Thanks Flavio and Marce1000 for suggestions. Appreciate.
12-13-2023 12:14 AM
Hi was facing the same issue,
%SESSION_MGR-5-FAIL: Chassis 1 R0/0: wncd: Authorization failed or unapplied for client (12cc.d24b.042b) on Interface capwap_90000009 AuditSessionID 0BA0640A00000076630D3516. Failure Reason: VLAN Failure. Failed attribute name DATA_VLAN.
I Policy Profile the VLAN Name was DATA_VLAN
I Change the VLAN NAME DATA_STAFF_VLAN to DATA_VLAN and this resolve my issue.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide