i have cisco 1260 Access point with standalone ios ap3g1-k9w7-tar.124-23c.
i download new IOS to connect the AP to the controller the new ios is ap3g1-k9w8-tar.124-23c.JA5.tar .
so please what the steps to upgrade th AP to LAP.
is it just install ios like in router & switch by tftp?
thanks in advance
Go to Solution.
You can use the archive download-sw command as that is what I do. Here is a link to a doc that shows various other ways.http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.htmlSent from Cisco Technical Support iPhone App
View solution in original post