03-01-2013 05:36 AM - edited 07-03-2021 11:39 PM
Hi,
I want to upgrade a 5508 WLC from version 6.0.196.0 to the most recent 7.4or 7.3 is it ok to skip so many versions, will this cause an issue?
Thanks,
03-01-2013 05:41 AM
No, you'll need to a staged upgrade. You need to go to a 7.0 release first, then up to 7.4. You'll also want to do the FUS upgrade as well.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html#wp976667
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
03-01-2013 05:48 AM
thanks so if I upgrade to
AIR-CT5500-K9-7-0-98-218.aes for example and then to
AIR-CT5500-K9-7-4-100-0.aes this will be fine?
Does the
AIR-CT5500-K9-7-4-100-0.aes version include / cater for the FUS you have highlighted? thanks
03-01-2013 05:55 AM
No... The FUS image is 1.7.0.0 and its in the download section. You need to install this and it takes 35-40 minutes to complete. So don't freak out when you can't ping the WLC for that long.
Sent from Cisco Technical Support iPhone App
03-01-2013 06:20 AM
thanks can you provide the link for this FUS image i can't find it. so it looks like from the link you sent this is done via the CLI. So to summarize
download FUS image (please provide link for this image)
install via CLI on current 6.0.196.0 version
6.0.196.0#sthash.SmfTLw5B.dpu
download and install any ver 7.0. image install via GUI
download and install version 7.4 via GUI
done.
please confirm thanks
AIR-CT5500-K9-7-0-98-218.aes#sthash.SmfTLw5B.dpu
AIR-CT5500-K9-7-0-98-218.aes#sthash.SmfTLw5B.dpuf
03-01-2013 07:23 AM
It's under the field upgrade software
http://software.cisco.com/download/release.html?mdfid=282600534&flowid=7012&softwareid=284364857&release=1.7.0.0&relind=AVAILABLE&rellifecycle=&reltype=latest
Sent from Cisco Technical Support iPhone App
03-03-2013 10:07 PM
thanks I've got it
Can someone please confirm the following steps are the coirrect way to approach this:
1) download FUS image
2) install FUS image via CLI on current 6.0.196.0 version
6.0.196.0#sthash.SmfTLw5B.dpu
3) download and install any ver 7.0. image install via GUI
4) download and install version 7.4 via GUI
thanks
03-04-2013 05:21 AM
Install the FUS after the image is installed. But you can perform this from the CLI also.
Sent from Cisco Technical Support iPhone App
03-04-2013 05:27 AM
so do steps 3 and 4 then 1 and 2. Sorry really want to make sure I do this in the right order the first time.. I thought the FUS image was required because I'm going from 6 to 7. Now I'm just confused. Really appreciate your guys feedback
1) download FUS image
2) install FUS image via CLI on current 6.0.196.0 version
6.0.196.0#sthash.SmfTLw5B.dpu
3) download and install any ver 7.0. image install via GUI
4) download and install version 7.4 via GUI
03-04-2013 06:48 AM
Okay let's make it simple. When you are done upgrading the WLC to v7.4, then install the FUS. That will be your last step.
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: