cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1006
Views
0
Helpful
3
Replies

Urgent Querry - Erroneous record received

chopra.harish1
Level 1
Level 1

Hi,

My As are not joining the WLC 5508.

I am getting the following error on my WLC :

*Feb 24 21:31:00.144:  status of voice_diag_test from WLC is false

*Feb 24 21:31:10.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.79.112.15 (WLC IP) peer_port: 5246

*Feb 24 21:31:10.000: %CAPWAP-5-CHANGED: CAPWAP changed state to

*Feb 24 21:31:10.851: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.79.112.15 peer_port: 5246

*Feb 24 21:31:10.852: %CAPWAP-5-SENDJOIN: sending Join Request to 10.79.112.15

*Feb 24 21:31:10.852: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN

*Feb 24 21:31:10.991: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG

*Feb 24 21:31:10.992: %DTLS-3-BAD_RECORD: Erroneous record received from 10.79.112.15: Duplicate (replayed) record

The current Country code set on my WLC is IN (India). I checked the AP, its manufatured in US.

Does it make any difference ?

Apart from this, I have given a static ip to my AP.

3 Replies 3

chopra.harish1
Level 1
Level 1

I changed the Country code to US and tried it.. but still the APs are not joining the WLC.

Any quick suggestions will be appriciable.

I am getting the following error now

d8:24:bd:59:6d:10
*apfReceiveTask: Feb 25 13:58:28.735: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg
*spamApTask5: Feb 25 13:57:49.687: %CAPWAP-3-POST_DECODE_ERR: capwap_ac_sm.c:4452 Post decode processing failed for Config status from AP d8:24:bd:59:6d:10
*spamApTask5: Feb 25 13:57:49.685: %LWAPP-3-RD_ERR4: capwap_ac_sm.c:2431 Invalid regulatory domain 802.11bg:-A     802.11a:-A for AP d8:24:bd:59:6d:10
*spamApTask5: Feb 25 13:57:49.685: %LOG-3-Q_IND: spam_lrad.c:9223 Invalid country code () for AP d8:24:bd:59:6d:10[...It occurred 2 times.!]
                                                                                                                                             *spamApTask5: Feb 25 13:57:49.685: %LWAPP-3-RD_ERR7: spam_lrad.c:9223 Invalid country code () for AP d8:24:bd:59:6d:10

It does not matter where the AP is produced. You would need to check the part number of the AP on Cisco website to verify if it is allowed to operate in the Asia or Asia pacific region or even in India. Countries or Continents have regulations on wireless lan which may restrict certain channels from been used in those countries. Manufacturers follow these guidelines when producing APs.

Also what WLC code is running on your WLC and static IP did you assign on to the AP?

Well, This is for every Wireless Engineer working in mainly in India and sub countries - We later noticed that the APs also had another Tag - which says "made in China " - and we tried changing the country code to the Asia pacific region. The one with KOREA (KE) matched and all the APs came UP.  So again the Country code was the issue.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: