Vertical mount 3602e antenna position

[Steve Chapman]

When mounting 3602E vertical should all the dual antenna point in one direction (ie all up, all down or 2 up and 2 down?)

Thanks

Steve

[Scott Fella · Accepted solution]

As long as they are vertical you are fine.

Sent from Cisco Technical Support iPhone App

[Stephen Rodriguez]

I'd keep them all in the same direction, that way you don't have polarity issues.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

[Leo Laohoo]

Antennas should be pointing towards the client or the floor.

[david-collins]

What about a design where 3602e's are mounted on a 30 foot high ceiling and the intent is to use 9 or 10 APs (for high density user senarios) and focus coverage downward in a smaller cell, column-like field?  Would that call for different antenna positions?

[George Stefanick]

30 foot high makes it a challenge to service the ap .. keep that in mind

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."