02-05-2013 01:14 PM - edited 07-03-2021 11:29 PM
When mounting 3602E vertical should all the dual antenna point in one direction (ie all up, all down or 2 up and 2 down?)
Thanks
Steve
Solved! Go to Solution.
02-05-2013 01:16 PM
As long as they are vertical you are fine.
Sent from Cisco Technical Support iPhone App
02-05-2013 01:16 PM
As long as they are vertical you are fine.
Sent from Cisco Technical Support iPhone App
02-05-2013 01:16 PM
I'd keep them all in the same direction, that way you don't have polarity issues.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
02-05-2013 01:21 PM
Antennas should be pointing towards the client or the floor.
02-23-2013 09:18 AM
What about a design where 3602e's are mounted on a 30 foot high ceiling and the intent is to use 9 or 10 APs (for high density user senarios) and focus coverage downward in a smaller cell, column-like field? Would that call for different antenna positions?
02-23-2013 10:36 AM
30 foot high makes it a challenge to service the ap .. keep that in mind
__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide