View AVC and P2P Blocks on 5520 WLC

[dan hale]

Hi All,

I have a Cisco WLC 5520 with AVC and P2P enabled to block certain applications. My issues are a wireless client can't ping or remote desktop to another client in the same WLAN which is in the same subnet. 

I suspect that the AVC or access list on the WLC is preventing this.

How can I see the specifics of what the ACL or AVC is blocking or can I drill down by the client by debugging or on the GUI to see my suspicion?

I tried debugging the client but, did not see anything specific.

Thanks,

Dan

[Sandeep Choudhary]

Hi,

How is the P2P configured: disable/ drop ?

Regards

Dont forget to rate helpful posts

[Scott Fella]

The easiest way is to remove what you have and then add one thing at a time. This is easily achieved by creating a new ssid that you can test with. P2P is probably the issue, but again, test and slowly eliminate variables and figure out what you need and don’t need.