08-22-2013 05:10 AM - edited 07-04-2021 12:41 AM
Dear All,
I read minimum code version of AP should be 7.3.
Someone please tell me the supported AP models for VWLC 7.4 series..?
KVS
Solved! Go to Solution.
08-22-2013 05:33 AM
The min code that the virtual can run was v7.3. Here is the supported code matrix. You can see which Sonia supported on what code.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Sent from Cisco Technical Support iPhone App
08-22-2013 05:33 AM
The min code that the virtual can run was v7.3. Here is the supported code matrix. You can see which Sonia supported on what code.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Sent from Cisco Technical Support iPhone App
08-22-2013 05:38 AM
Many thanks for your reply.
So, Access points that are supported 7.3 code can be used to register with vWLC..?
7.3.x | 1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU, 1552S, 1130, 1240, 1250, 1260, 2600, 3500e, 3500i, 3600e, 3600i, 3500p, 1140, 600 OEAP, AP801, AP802 |
Thanks in advance...
08-22-2013 06:44 AM
That is correct.
Sent from Cisco Technical Support iPhone App
08-23-2013 02:45 AM
Case Solution:
Please check the below link for Wireless LAN Controller Software Release Compatibility Matrix.
This link will be more helpful for you
08-23-2013 05:36 AM
Aqeel,
I already posted that link.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide