01-26-2009 07:01 PM - edited 07-03-2021 05:03 PM
I have WCS ver.5.2.110.0 and 4 1131APs running on WLC4402 ver.5.1.151.0. WCS shows heatmap for 3 APs but doesn't show one that is running normally.
Have anyone seen this problem and how can I solve it?
Thank you very much.
Solved! Go to Solution.
01-28-2009 03:59 PM
Yes this is most likely the issue. We can not draw a heatmap for an AP with antenna type of other.
Go to the map with this AP on it and use the position APs in the pulldown. Click on the AP and in the left hand pane you should be able to adjust the antenna type and save.
http://www.cisco.com/en/US/docs/wireless/wcs/5.2/configuration/guide/5_2maps.html#wpmkr1126389
01-26-2009 08:20 PM
01-28-2009 03:59 PM
Yes this is most likely the issue. We can not draw a heatmap for an AP with antenna type of other.
Go to the map with this AP on it and use the position APs in the pulldown. Click on the AP and in the left hand pane you should be able to adjust the antenna type and save.
http://www.cisco.com/en/US/docs/wireless/wcs/5.2/configuration/guide/5_2maps.html#wpmkr1126389
01-28-2009 10:27 PM
Thanks for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide