09-26-2015 02:28 AM - edited 07-05-2021 04:00 AM
Hi All,
I do know that captive portal could be setup on cisco WLC 2504, such that internet users could login as follows:
Username, password or mobile number.
And get the authorization code on mobile number.
However I would like to know whether the above configuration would work with just 2504 or do we need any other device to achieve this.
09-28-2015 03:35 AM
Hi Garuav,
Webauth will work with 2504 as well. WLC .
WLC can store max 2048 local entries so it depends on your requirement size.
you will need a RADIUS SERVER(We are using ISE) to store/assign guest credentials and send the Code/password via smtp/SMS gateway.
Regards
Dont forget to rate helpful posts
09-28-2015 10:56 PM
Hi Sandeep,
Thanks for your reply,
could you please share configuration guide for RADIUS SERVER(We are using ISE) to store/assign guest credentials and send the Code/password via smtp/SMS gateway.
Regards,
Gaurav singh
09-28-2015 11:39 PM
Not openly.....
Check your PM.
Regards
10-05-2015 03:51 AM
I am having problem in Cisco WLC 2504 at https://1.1.1.1
Would you please help to solve this issue ?
If there's any detailed best practiced document available to configure Cisco WLC 2504 with full controlled policies.
Would highly appreciate.
Thanks
Regards
Faisal Raza.
10-06-2015 09:18 PM
kindly follow below steps:-
Web Auth > Web Login Page
and configure redirect page to http or any http url.
Regards,
Gaurav
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: