02-28-2014 05:23 PM - edited 07-05-2021 12:18 AM
I have a customer who is trying to setup a Radius server to authenticate Management users for the controller, she is using a Microsoft NPS R2 server. All good at this point.
She needs to know what attributes are shared between the server and the WLC to complete the authentication
because she is being successfully authenticated, but still unable to access the WLC.
Someone knows what those attributes are?
The only information at the moment that I found, was on a document that said that different management
users can receive different Vendor-specific Attributes. That means that the returned attributes to the WLC
will depend of what radius server model or platform you are using.
Solved! Go to Solution.
02-28-2014 06:28 PM
Robin,
For using Microsoft radius to authenticate management users, you can reference this document, which shows you the steps involved.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
03-02-2014 08:11 AM
Hi Robin,
you need to send the "service-type" atttribute to the controller.
value "administrative" = read/write
value "nas prompt" = read only
hope that helps,
Stefan
02-28-2014 06:28 PM
Robin,
For using Microsoft radius to authenticate management users, you can reference this document, which shows you the steps involved.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
03-02-2014 08:11 AM
Hi Robin,
you need to send the "service-type" atttribute to the controller.
value "administrative" = read/write
value "nas prompt" = read only
hope that helps,
Stefan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide