cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5946
Views
0
Helpful
5
Replies

what is the meaning of yellow color blinking for 3g/4g led in cisco 819 4g router

tarekfattal1
Level 1
Level 1

what is the meaning of yellow blinking for 3g/4g led in cisco 819 4g router?

5 Replies 5

mohanak
Cisco Employee
Cisco Employee

 

LED
 
Color
 
Description
 

SYS

 

Yellow

 

FPGA download is complete.

  

Green (blinking)

 

ROMMON is operational.

  

Green (solid)

 

Cisco IOS is operational.

  

Green (four blinks during bootup)

 

Reset button has been pushed during the bootup.

  

Off

 

After powering up, when FPGA is being downloaded (in ROMMON).

 

ACT

 

Green

 

Network activity on FE switch ports, GE WAN port, 3G cellular interface, and serial interfaces.

  

Off

 

No network connectivity.

 

WWAN

 

Green

 

Module is powered on and connected, but is not transmitting or receiving.

 

Green (slow blinking)

 

Module is powered on and searching for connection.

 

Green (fast blinking)

 

Module is transmitting or receiving.

 

Off

 

Module is not powered.

 

GPS - EHWIC

 

Green (solid)

 

GPS coordinates are obtained.

 

Off

 

GPS is disabled, GPS is enabled without GPS mode and NMEA configuration, or GPS is acquiring.

 

GPS - 819 ISR

 

Green (solid)

 

GPS coordinates are obtained.

 

Green (blinking)

 

GPS is acquiring.

 

Off

 

GPS is disabled or GPS is enabled without GPS mode and NMEA configuration.

 

RSSI

 

Green (solid)

 

Signal > -60 dBm

 

Very strong signal

  

Green (three blinks and then a long pause)

 

Signal <= -60 to 74 dBm

 

Strong signal

  

Green (two blinks and then a long pause)

 

Signal <= -75 to 89 dBm

 

Fair signal

  

Green (one blink and then a long pause)

 

Signal <= -90 to 109 dBm

 

Marginal signal

  

Off

 

Signal <= -110 dBm

 

Unusable signal

 

SIM

 

Green / Yellow (one green blink followed by two yellow blinks)

 

SIM in slot 0 is active, SIM in slot 1 is not.

Yellow / Green (one yellow blink followed by two green blinks)

SIM in slot 1 is active, SIM in slot 0 is not.

 

Off / Green (two green blinks and then a pause)

 

No SIM in slot 0, SIM present in slot 1.

 

Green / Off (slow single green blink and then a pause)

 

SIM present in slot 0, no SIM in slot 1.

 

Off / Off

 

No SIM present in either slots.

 

3G/4G

 

Green (one blink and then a pause)

 

For 1xRTT, EGPRS, or GPRS service.

  

Green (two blinks and then a pause)

 

For EVDO, EVDO/1xRTT, or UMTS service.

  

Green (three blinks and then a pause)

 

For EVDO/1xRTT RevA, HSPA, or HSUPA/HSDPA service.

  

Green (four blinks and then a pause)

 

For HSPA+ service.

  

Green (Solid)

 

For 4G/LTE service.

  

Off

 

No service.

 

thanks dear mohanak,

I have this table but at the end you find 3g/4g led (only green color is mentioned)

what about orange or yellow blinking?

 

Did you ever find an answer to this. We have one unit doing the same.

Seems to be working ok, but would like to know what the orange led is for as all documentation says green.

same issue, any news about the reason of the yellow blinking led?

cpueringer
Level 1
Level 1

anything new? i have the same issue

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card