05-22-2019 08:08 AM - edited 07-05-2021 10:26 AM
On a 5520 WLC
when i create a wlan, i have to assign it to an interface.
when i create an AP group, then add a wlan to it, I have the ability to assign an interface here was well. the note on it reads below, but doesn't really apply since i am no using FlexConnect for anything.
So why can I do this? What happens if they are set to different interfaces (not really sure I want to test)? I cannot find any documentation on this.
Solved! Go to Solution.
05-22-2019 09:05 AM
Interface assign under "AP Group" will take precedence. In that way you can override WLAN map interface to different interfaces based on AP Group.
HTH
Rasika
*** Pls rate all useful responses ***
05-22-2019 09:05 AM
Interface assign under "AP Group" will take precedence. In that way you can override WLAN map interface to different interfaces based on AP Group.
HTH
Rasika
*** Pls rate all useful responses ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide