cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
329
Views
15
Helpful
5
Replies
Ha Dao
Beginner

Wifi roaming even client is not moving

Recently some user at a area in my office complain me their phones disconnect and reconnect many times. They just only stay in a room. We have APs both front and back of that room. And i found that client is roaming between 2 AP (1 front and 1 back the room). It happen every 1 - 2 minutes.

From coreswitch i ping client IP with 5000 packets, and client roaming 4 times:

wlc3.JPG

 

I am using WLC 5520, Software 8.7.106.0 and AP AIR-AP1815M-B-K9

 

Can you give me some advice, your best practices in roaming optimization

Tks

 

 

 

 

 

5 REPLIES 5
Leo Laohoo
VIP Community Legend

@Ha Dao wrote:

Software 8.7.106.0


I would strongly recommend avoiding this particular firmware version. 


@Ha Dao wrote:

Recently some user at a area in my office complain me their phones disconnect and reconnect many times. They just only stay in a room. We have APs both front and back of that room. And i found that client is roaming between 2 AP (1 front and 1 back the room). It happen every 1 - 2 minutes.


Is this happening to only one phone/user?

Tks Leo
What OS version you recommend to me ?
That issue happens to every phones in 2 rooms side by side
Leo Laohoo
VIP Community Legend

Is there any reason why you need 8.7.X.X?
Otherwise, 8.5 MR5 or MR6 are good and so is the latest 8.8.X.X and 8.10.X.X.
Avoid 8.6.X.X, 8.7.X.X and 8.9.X.X.

OK, I am going to update to 8.10.121.0 ED . Hope it s working well. Tks
Haydn Andrews
Rising star

Cisco best practices for VoWIFI are here:

 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enterprise_Mobility_8-1_Deployment_Guide/Chapter-9.html 

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
Content for Community-Ad