wIPS and Cisco 1552e

[renoufi]

Hi Experts,

Is the Cisco 1552e in LWAPP mode supposed to support wIPS?  The option is greyed out on my 2504 WLC

Version 7.4.100.60

AIR-CAP1552E-N-K9

[Surendra BG]

Issue the below command..

config ap mode flexconnect submode

[renoufi]

Thanks, but no cigar.

Result pretty much as expected. I've raised (yet another!!) wireless TAC case.

(Cisco Controller) >config ap mode flexconnect submode ?

none           No submode active for the Cisco AP.

pppoe-only     WIPS submode for the Cisco AP.

pppoe-wips     WIPS submode for the Cisco AP.

wips           WIPS submode for the Cisco AP.

(Cisco Controller) >config ap mode flexconnect submode wips ?

     Enter the name of the Cisco AP.

(Cisco Controller) >config ap mode flexconnect submode wips SB-AP-01

Unable to set submode. This AP model does not support WIPS submode.

(Cisco Controller) >

[renoufi]

What a crock!

Here's the reply from Cisco.

Where's that number for Avaya?

The 1552E does not support WIPS. I have checked the behavior in the lab as well and also internal documents.

Unfortunately, there is no external document stating the same explicitly.

Regards,

Priyanka

[Surendra BG]

I hav reached out to the BU to check if this is in the roadmap.. We really appreciate ur patience... i guess we serve our customer better than any other company anyday..

Regarda

Surendra

[Surendra BG]

n yeah.. thanks for the rating much appreciated..

Regards

Surendra

[Abha Jha]

Please find the give link:-

http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/consolidated/b_cg74_CONSOLIDATED_chapter_01000010.html

[brilevin]

wIPS sub-mode is not supported on the 1530 or 1550 series access points.

A link to documentation can be found here:  http://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/7-6/design/guide/mesh76/mesh76_chapter_01.html#ID543