05-05-2010 12:16 AM - edited 07-03-2021 06:46 PM
Dear Sir,
I need to configure accesspoint 1140 in my local lan. I have 5 vlans in my network.
when i configure all ssid and vlan in 1140 i am unable to ping from 1140 to my other vlans except that vlan which are assign to ssid. from other vlans to 1140 interface ip also not pinging.
Done things:- I trunk 2960 switch port which is connected to 1140 access point.
3750 i configure dhcp pool for two SSID which i configure on 3750 with vlan created on 1140 and 3750.
can you tell what i have to do on switch side and accesspoint. to ping from access point to other vlans and other vlans to access point.
i am new on cisco.
05-05-2010 02:47 AM
Would be nice if you can post your config for us to have a review.
05-05-2010 03:44 AM
Dear Friend,
I did not configured right know, suppose new access point 1140 and i need to connect to switch 2960. I have 5 vlans on switch. Just i trunk that port which i need to connect 1140. but when i was connected accesspoint to switch with manual ip address it will not ping from access point to other vlan or even default gateway of access point.
what i have to do?
05-05-2010 03:10 AM
Dear Friend,
I did not configured right know, suppose new access point 1140 and i need to connect to switch 2960. I have 5 vlans on switch. Just i trunk that port which i need to connect 1140. but when i was connected accesspoint to switch with manual ip address it will not ping from access point to other vlan or even default gateway of access point.
what i have to do?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide