10-17-2022 10:29 PM
Hi, I was wondering how to enable wireless client to access the WMI of C9800 as one of the SSID is belongs to IT infra where the IT staff would like to access the WMI of C9800 via GUI and SSH
Many Thanks,
Darren
Solved! Go to Solution.
10-17-2022 11:12 PM
- FYI : https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/guide-c07-743627.html#DisableManagementviaWireless , but do the reverse ! Whilst you are at it have a checkup of the C9800 configuration (always very useful and advisable) -> Use the CLI command : show tech wireless , have the output analyzed by https://cway.cisco.com/
M.
10-17-2022 11:12 PM
- FYI : https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/guide-c07-743627.html#DisableManagementviaWireless , but do the reverse ! Whilst you are at it have a checkup of the C9800 configuration (always very useful and advisable) -> Use the CLI command : show tech wireless , have the output analyzed by https://cway.cisco.com/
M.
10-18-2022 12:06 AM
Thanks alot @marce1000
10-18-2022 01:25 AM
- No problem , take note of : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu29200 , which probably won't affect you now , but useful to know.
M.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: