11-17-2020 01:51 AM - edited 07-05-2021 12:47 PM
Please I need to make this SSID is the best performance and speed what Can I do on the tab of QOS
11-17-2020 02:03 AM
Depends what you wnat to use throught the ssid.
use voice(Platinum) or video(gold) to get best performance.
Regards
Dont forget to rate helpful posts
11-17-2020 04:21 AM
i want to use video
11-17-2020 04:23 AM
what is fastlane benefit
11-17-2020 04:28 AM
Please go through these docs:
http://giantsnerdwifi.blogspot.com/2017/07/cisco-wlc-fastlane-for-ios-what-it-does.html
https://easyqos-16.readthedocs.io/en/latest/chapter-10.html
Regards
Dont forget to arte helpful posts
11-17-2020 05:28 PM
If I were you I wouldnt worry too much abt QOS, I will try to fine tune my RF profiles to best suit the environment where the AP' are in.
I might use QOS a only as a life line.
11-18-2020 05:30 AM
First thing to look at is the wireless design and the radio utilization of each and every AP. The radio utilization shouldn't be used by more than 20% (on 2.4 GHz) or 10% (5 GHz) as a rule of thumb if no traffic is flowing. If it is, you might first need to re-do the wireless design.
Next you could look at, is AVC: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/AVC_8point8_dg.html
This can, but not always will, help for certain protocols.
Also remember, the more clients per AP, the less throughput you will achieve. What are your bandwidth requirements (in Mbps per client) and kind of APs and clients?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: