04-08-2015 02:00 PM - edited 07-05-2021 02:52 AM
I have a Cisco 2504 with Image 7.4.121.0 and AP 2702I with image 15.3(3)JA, i did a small lab and i connect the ap directly to the POE port on the controller and I did all configuration correct and made the controller a DHCP. However the AP is getting IP but with following error:
*Mar 1 01:43:32.639: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 01:43:35.711: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.1.11, mask 255.255.255.0, hostname AP881d.fca9.5310
I read about it and everybody is talking about option 43, I tried to activate this option on the controller but i think it doesn't support.
please advice.
04-08-2015 05:29 PM
Seems like compatibility issue;
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
04-08-2015 09:59 PM
I read it, and I'm trying to upgrade the wireless controller from my Mac but its always giving the same error from my TFTP server, which is :
access violation
04-08-2015 11:42 PM
I used a laptop with Windows and i discovered that there were a problem with the image that i downloaded from Cisco.. i did download it again and everything is working just fine with my wireless controller... thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide