cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
474
Views
5
Helpful
2
Replies
Иван
Beginner

Wireless Protection Policy in WLC Cisco

Hello, colleagues! Can you please help me understand how work Wireless Protection on Cisco WLC?

On WLC setting some rules

 

 

rogue rule.PNG

 

is a Kenetic(for example).

In Alarms in Prime i see :

"Rogue AP 'ec:43:f6:00:a4:a8' with SSID 'Keenetic-4760' is detected by AP 'AP-KLE-MTR-1-24-3' Radio type '802.11b' with RSSI '-72'. Rogue AP contained."

 

Does that mean my Access Point AP-RUS-MTR-1-24-3 are send to clients of Kenetic deauth-messages? 

And if this AP (Kenetic) is not a rogue. It turns out that my AP AP-KLE-MTR-1-24-3 interfering of neighbors?

 

Thanks a lot!

Ivan

1 ACCEPTED SOLUTION

Accepted Solutions
d.friday
Enthusiast

so if you are containing a rouge AP you are sending deauth packets, that will cause issues to other people trying to use the Kenetic  SSID

 

Here is a link to that may help you understand, it old but still valid 

https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/112045-handling-rogue-cuwn-00.html

 

I hope this helps

View solution in original post

2 REPLIES 2
d.friday
Enthusiast

so if you are containing a rouge AP you are sending deauth packets, that will cause issues to other people trying to use the Kenetic  SSID

 

Here is a link to that may help you understand, it old but still valid 

https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/112045-handling-rogue-cuwn-00.html

 

I hope this helps

View solution in original post

Thanks a lot for you answer!

Have a nice day!

Ivan

Create
Recognize Your Peers
Content for Community-Ad