05-06-2020 07:28 AM - edited 07-05-2021 12:01 PM
Hello, colleagues! Can you please help me understand how work Wireless Protection on Cisco WLC?
On WLC setting some rules
is a Kenetic(for example).
In Alarms in Prime i see :
"Rogue AP 'ec:43:f6:00:a4:a8' with SSID 'Keenetic-4760' is detected by AP 'AP-KLE-MTR-1-24-3' Radio type '802.11b' with RSSI '-72'. Rogue AP contained."
Does that mean my Access Point AP-RUS-MTR-1-24-3 are send to clients of Kenetic deauth-messages?
And if this AP (Kenetic) is not a rogue. It turns out that my AP AP-KLE-MTR-1-24-3 interfering of neighbors?
Thanks a lot!
Ivan
Solved! Go to Solution.
05-06-2020 09:17 AM
so if you are containing a rouge AP you are sending deauth packets, that will cause issues to other people trying to use the Kenetic SSID
Here is a link to that may help you understand, it old but still valid
I hope this helps
05-06-2020 09:17 AM
so if you are containing a rouge AP you are sending deauth packets, that will cause issues to other people trying to use the Kenetic SSID
Here is a link to that may help you understand, it old but still valid
I hope this helps
05-06-2020 11:31 AM
Thanks a lot for you answer!
Have a nice day!
Ivan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide