Greetings,
Need some clarificaiton mobility/mobility groups.
- WCS running 6.0.182
- I have 4 mobility groups (avg group has 4 to 5 WLC's with there respective back up WLC's) Layer 3 /
Inter-subnet roaming
- All WLC's are currently running 4.2.130
- For testing purposes I need to create a new mobility group and move 2 WLC's over to it; Upgrade the 2 WLC's to 6.0.182
- The WiSM (2 WLC's) I have to work with are currently split among 2 different mobility groups say mobility 1 and mobility 2.
My concern is the one prerequisite below:
Configuring Mobility Groups
Prerequisite:
Note
For the Cisco WiSM, both controllers should be configured with the same mobility group
name for seamless routing among 300 access points.
Does this only apply if I anticipated routing between these 2 controllers, such as being configured for Inter-Controller Roaming (which occurs when the controllers’ wireless LAN interfaces are on the same IP subnet).
Or will this prerequisite cause any impact with the changes I'm wanting to do with Layer 3 /
Inter-subnet roaming (wireless LAN interfaces are on different IP subnets).
Comments and thoughts?
Much appreciated -
-RC
: