05-08-2007 02:01 PM - edited 07-03-2021 02:02 PM
I'm wondering if any ones knows if the WISM blade supports Hybrid Mode on a 6509 or is Native Mode the only way to run WISM. Thanks in advance
Solved! Go to Solution.
05-08-2007 10:07 PM
Hi Friend,
WISM blade is not supported in Hybrid mode and Native mode is the only way to make it work in 6509 chassis.
It requires at least: 12.2(18)SXF2 and later.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm#wp2856861
HTH
Ankur
*Pls rate all helpfull post
05-08-2007 10:07 PM
Hi Friend,
WISM blade is not supported in Hybrid mode and Native mode is the only way to make it work in 6509 chassis.
It requires at least: 12.2(18)SXF2 and later.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm#wp2856861
HTH
Ankur
*Pls rate all helpfull post
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide