WiSM v2 (Hardware Specification)

[ittichai_a]

Hi

I would like to know hardware specification on WiSM V2 (such as Memory, CPU) if it have. And I would like to know in technical term how WiSM v2 working with 6500 catalyst. So, is it possible to explain to me ?

Best Regards

[pcroak]

Hello,

Here you will find the WISM2 datasheet:

http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps9798/ps11634/data_sheet_c78-645124.html

And here is the deployment guide for WISM2:

http://www.cisco.com/en/US/products/hw/modules/ps2706/products_tech_note09186a0080b7c904.shtml

These documents should provide you with an overview of the WISM2 module.

-Patrick Croak

Wireless TAC

[ittichai_a]

Hi pcroak

Thanks with your documentation, so, i may ask you some question below;

- Have CPU or Memory inside on the WiSM2?

- How much WiSM2 get performance from 6500?

Coz some question, our customer may need to know the information. Please give me some information

Best Regrads

[Leo Laohoo]

- Have CPU or Memory inside on the WiSM2?

Same as the WLC 5508.

- How much WiSM2 get performance from 6500?

Can you elaborate?  The meaning of "performance"?  The WiSM2 will use a single 10Gb virtual link between the blade and the Sup720/Sup2T.  The Sup720 has a 40 Gb (half Duplex) backplane and the Sup2T has an 80Gb (half duplex) backplane.  The WiSM2 doesn't need anything higher than an 8Gb link to the rest of the chassis.