I'm encountering some issues with my network installed last month. There are one Cisco 3650 MC and two LAP 2702.
Users have latency problems using this network. Laptop to laptop, there could be 400ms ping answer on the same SSID.
Do you know if there's any configuration to implement on the switch of if it's already configured for best performances ? For information, we've tried to connect on g/n on 2.4GHz and n/a on 5GHz and it's always the same.
Thanks in advance.
Do change the below setting in WLC:
1. Click on Wireless>>>802.11a/n/ac and 802.11b/g/n>>>RRM>>>>TPC>>>TX power level assignment >>>fix it 1.
2. click on wireless>>>>802.11a/n/ac and 802.11b/g/n>>> network >>>>Data Rates
1 , 2, 5.5, 6 Mbps === set disabled all.
6 Mbps === disabled
9 Mbps ==== Mandatory
I will re-install my network tomorrow. I test this configuration and tell you if it's better.
Thanks a lot.
Please help me regarding Cisco AP 3702e not associating wlc ver 7.6.130.
New AP detail is as follows:
Cisco IOS Software, C3700 Software (AP3G2-RCVK9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 19-Dec-14 11:25 by prod_rel_team
ROM: Bootstrap program is C3700 boot loader
BOOTLDR: C3700 Boot Loader (AP3G2-BOOT-M) LoaderVersion 15.2(4)JB, RELEASE SOFTWARE (fc1)
APa89d.21df.f198 uptime is 46 minutes
System returned to ROM by power-on
System image file is "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with
applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
cisco AIR-CAP3702E-D-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.
Processor board ID FGL1909X179
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 184.108.40.206
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: A8:9D:21:DF:F1:98
Part Number : 73-15397-01
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC19050J4U
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.25Top Assembly Part Number : 068-
Top Assembly Serial Number : FGL1909X179
Top Revision Number : A0
Product/Model Number : AIR-CAP3702E-D-K9
Configuration register is 0xF
Its lwapp ver 220.127.116.11.
WLC detail is:
18.104.22.168 associated ap ver
22.214.171.124 boot loader
should I downgrade the AP ver 126.96.36.199, client can't upgrade WLC.
Open a new thread as your issue is not related to this original thread.
Also attach AP console output while it is trying to register.