WLC-2100 with LWAPP APs in headquarter and branch?

[schuetzm]

Hello,

can one controller 2100 be used to manage APs in the headquarter and in branches?

We plan to use 6 APs-1131 in the HQ and 4 APs-1131 in the branch. Is this scenario supported by a AIR-WLC2112-K9 in the HQ?

What do I have to check regarding the WAN (bandwidth, delay) and the LANs (Switches, VLANs,...)?

Thanks and regards

Matthias

[George Stefanick]

What is your existing connectivity between the HQ and the Branch ?

[Leo Laohoo]

Sure.  You can use H-REAP.

H-Reap Design and Deployment Guide
http://www.cisco.com/en/US/products/ps6087/products_tech_note09186a0080736123.shtml

H-REAP Modes of Operation Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml

Hybrid Remote Edge Access Point (H-REAP) Basic Troubleshooting
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008081103d.shtml