05-17-2013 06:22 AM - edited 07-04-2021 12:05 AM
Hello everybody,
I have a Mesh architecture with 2112 WLC and 1042 APs
I want just to know if I can connect one 1310 AP to the ethernet port of a mesh 1042 AP with ethernet bridging enabled.
thanks
05-17-2013 12:50 PM
I would think if your 1310 was in autonomous mode you would be able to. It would be like connecting a switch to the Ethernet of a MAP.
Sent from Cisco Technical Support iPhone App
05-17-2013 01:01 PM
Hello benhamzagi,
Thank you for contacting the Sales Acceleration Center (SAC) regarding your recent inquiry, Case Number 80931
Case Description:
Case Solution:
Here is the compatibility Matrix link
Or the attach tables will help you base on Release, Controller, Mesh and AP
Table 3 Controller Software Release and Controller Model Support Matrix | ||
Controller Model | First Support | Last Support |
2100 | 4.2.x | 7.0.x |
2500 | 7.0.x | - |
Cat3850 | 3.2.0SE | - |
4400 | 4.2.x | 7.0.x |
5500 | 6.0.x | - |
5700 | 3.2.0SE | - |
7500 | 7.0.x | - |
8500 | 7.3.x | - |
Virtual Controller | 7.3.x | - |
WiSM | 4.2.x | 7.0.x |
WiSM2 (1 DP) | 7.0.x | - |
WiSM2 (2 DP) | 7.2.x | - |
SRE | 7.0.x | - |
Table 4 Mesh and Controller Software Releases and the Supported APs | |
Mesh and Controller Releases | Supported Access Points |
7.4.x | 1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU, 1552S, 1130, 1240, 1250, 1260, 1600, 2600, 3500e, 3500i, 3500p, 3600e, 3600i, 1140, 600 OEAP, AP801, AP802 |
7.3.x | 1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU, 1552S, 1130, 1240, 1250, 1260, 2600, 3500e, 3500i, 3600e, 3600i, 3500p, 1140, 600 OEAP, AP801, AP802 |
7.2.11x.x | 1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1552S, 1130, 1240, 1250, 1260, 2600, 3500e, 3500i, 3500p, 3600e, 3600i, 1140, 600 OEAP, AP801, AP802 |
7.2.10x.x | 1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1552S, 1130, 1240, 1250, 1260, 3500e, 3500i, 3600e, 3500p, 3600i, 1140, 600 OEAP, AP801, AP802 |
7.0.2x.x | 1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1130, 1240, 1250, 1260, 3500e, 3500i, 3500p, 1140, 600 OEAP, AP801, AP802 |
7.0.116.0 | 1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1130, 1240, 1250, 1260, 3500e, 3500i, 3500p, 1140, 600 OEAP, AP801, AP802 |
7.0.98.x | 1522, 1524PS, 1524SB, 1130, 1240 |
6.0.202.0 | 1522, 1524PS, 1524SB, 1130, 1240 |
5.2.193.0 | 1522, 1524PS, 1130, 1240 |
4.1.192.35M (Mesh Release 3) | 1505, 1510, 1522, 1524PS, 1130, 1240 |
4.1.191.24M (Mesh Release 2) | 1505, 1510, 1522 (US, Canada, and RoW), 1130, 1240 |
4.1.190.5 (Mesh Release 1) | 1505, 1510, 1522 (US and Canada) |
As per your confirmation, I am going to close the case for this specific inquiry. We strive to provide you with excellent service. Please feel free to reach out to me or any member of the SAC team if we can be of any further assistance or if you have any other related questions in the future. We value your input and look forward to serving you moving forward.
05-17-2013 11:29 PM
I'm not asking about the compatibility, I want to know if the lightwight 1310 AP can operate normally behind an ethernet port of 1042 mesh AP
05-18-2013 06:19 AM
If its lightweight it will not work. Autonomous should.
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: