cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
32481
Views
15
Helpful
10
Replies

WLC 2504 max AP support

Marko Pribanic
Level 1
Level 1

Hi all,

Does anybody know what is the maximum number of APs supported on Cisco 2504 WLC?

According to the Data Sheet it is 75:

http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps11630/data_sheet_c78-645111.html

But according to the config guide it is 50:

http://www.cisco.com/en/US/docs/wireless/controller/7.3/configuration/guide/b_wlc-cg_chapter_01.html#ID263

I believe the correct number is 50, but I just want to be sure.

Is this a software limitation?

1 Accepted Solution

Accepted Solutions

Saravanan Lakshmanan
Cisco Employee
Cisco Employee

yes, until 7.3 code only 50 APs are supported. 75 APs are supported with 7.4 code.

View solution in original post

10 Replies 10

Scott Fella
Hall of Fame
Hall of Fame

Currently it is 50 and is a software limitation. That's why I say currently:)

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Saravanan Lakshmanan
Cisco Employee
Cisco Employee

yes, until 7.3 code only 50 APs are supported. 75 APs are supported with 7.4 code.

yes, until 7.3 code only 50 APs are supported. 75 APs are supported with 7.4 code.

So what does that mean for the WiSM-2?  Will the number of WAPs (from 1K) expand?

That's interesting. 75 aps for the 2500 series. That's a little scary at the same time.

Sent from Cisco Technical Support iPad App

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

Hi Leo

Don't think there's going to be any change on wism2 on supported AP limit.

Hi George

whenever new client added to WLC it needs some memory to seat the client on wlc, guess 2500 got room for that.

i think throughput of 2500 also getting doubled to 1gb from 500mb to increase performance.

Hello,

But code 7.4 is not orderable on the CCW, can we download it ?

Thanks

Moamen

Yes you can download it as long as you have a support contract. You would need to purchase a license to increase you ap license count also.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Does the WLC 2504 support any number of AP-s by default? I am not talking about the eval license but permanent license ?!

None by default. You purchase the license with the purchase of the unit.
-Scott
*** Please rate helpful posts ***

manjeets
Level 3
Level 3

Agreed,

7.3 code only 50 APs  are supported. 75 APs are supported with 7.4 code.

Review Cisco Networking for a $25 gift card