cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3846
Views
0
Helpful
4
Replies
Highlighted
Beginner

WLC 2504 QoS Policy

Hi,

Can someone please tell me why I dont have QoS roles under the QoS tab?

Here is a screen dump:

Untitled.png

Here is the version I'm running to:

Untitled1.png

4 REPLIES 4
Highlighted

Well, that is strange.

I would think that roles are not supported on 2504 WLC but no document says this.

Can you please try configuring roles from CLI? and see what message you get?

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"
Highlighted

Hi Amjad,

I've also tried it from the cli but still nothing there either.

Do you think it would be worth upgrading the software on it?

Thanks,

Ross.

Highlighted

Hi Ross,

To be honest I don't know. I don't have 2500 WLC to double check for you.

I don't know if this is by design or you have a kind of a problem. I fear that this is per design and if you upgrad you'll find same issue.
I think anyone that has a 2500 WLC can confirm for us if he has the QoS roles or not. I tried to find a document but could not find anything say a word about the roles on 2500 WLCs specifically.

What do you get on CLI? the commands are not available?

Regards,

Amjad

Rating useful replies is more useful than saying "Thank you"
Highlighted
Cisco Employee

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html

Features Not Supported on Cisco 2500 Series Controllers

These software features are not supported on Cisco 2500 Series Controllers:

Support for wired guest access.

Cisco  2500 Series Controller cannot be configured as an auto anchor  controller. However, you can configure it as a foreign controller.

Supports only multicast-multicast mode.

Bandwidth Contract feature is unsupported.

Access points in direct connect mode is unsupported

Service port support

Apple Talk Bridging

LAG

Wired Guest