WLC 4400

[garyleggat]

WLC4402/4404 firmware images? This WLC is EOL and thus images are no longer available from Cisco. My lab WLC has 7.0.240 code and was hoping you may have something newer. I got my hands on a couple of 3600 series APs for my lab, but this AP is only supported in 7.2 code or newer

[Rasika Nayanajith]

4400 series last supported on 7.0.x. Therefore no upgrade option for you with that hardware. Refer below

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#77471 

HTH

Rasika

*** Pls rate all useful responses ***

[garyleggat]

I was looking for 7.2 code it’s says 7.x in the chart

[Leo Laohoo]

The 44XX-series WLC has already gone past the End-of-Support date.  

When this milestone is reached, Cisco removes all documentation and files about the product/appliance.  
The only way left is to use your favourite internet search engine for the exact filename you are looking for.

[Rasika Nayanajith]

That should be corrected as 7.0.x 

Below is from 7.2. release notes & it clearly stated 4400 is not supported with that software version.

Controller Platforms Not Supported

The following controller platforms are not supported for the 7.2 and later releases:

• Cisco 4400 Series Wireless LAN Controller
• Cisco 2100 Series Wireless LAN Controller
• Cisco Catalyst 3750G Integrated Wireless LAN Controller
• Cisco Catalyst 6500 Series/7600 Series Wireless Services Module (WiSM)
• Cisco Wireless LAN Controller Module (NM/NME)

https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn7_2_110_0.html#pgfId-1166630 

HTH

Rasika