09-24-2020 01:01 PM - edited 07-05-2021 12:33 PM
WLC4402/4404 firmware images? This WLC is EOL and thus images are no longer available from Cisco. My lab WLC has 7.0.240 code and was hoping you may have something newer. I got my hands on a couple of 3600 series APs for my lab, but this AP is only supported in 7.2 code or newer
09-24-2020 03:33 PM
4400 series last supported on 7.0.x. Therefore no upgrade option for you with that hardware. Refer below
https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#77471
HTH
Rasika
*** Pls rate all useful responses ***
09-24-2020 04:27 PM
09-24-2020 05:36 PM
The 44XX-series WLC has already gone past the End-of-Support date.
When this milestone is reached, Cisco removes all documentation and files about the product/appliance.
The only way left is to use your favourite internet search engine for the exact filename you are looking for.
09-25-2020 05:38 AM
That should be corrected as 7.0.x
Below is from 7.2. release notes & it clearly stated 4400 is not supported with that software version.
The following controller platforms are not supported for the 7.2 and later releases:
HTH
Rasika
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide