cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
156
Views
0
Helpful
0
Replies
sergey_vlas
Beginner

WLC 5760 "Received unhandled capwap update event" logg messages

Hi,

Who can tell me, what does means this logg messages on wlc 5760?

Jun 22 16:53:23: %IOSXE-7-PLATFORM: STANDBY:1 process wcm: capwap_nova_platform.c:3834 Error: Received unhandled capwap update event 5 (wlc-triss-1)
Jun 22 16:53:37: %IOSXE-7-PLATFORM: STANDBY:1 process wcm: capwap_nova_platform.c:3834 Error: Received unhandled capwap update event 5 (wlc-triss-1)
Jun 22 16:53:53: %IOSXE-7-PLATFORM: STANDBY:1 process wcm: capwap_nova_platform.c:3834 Error: Received unhandled capwap update event 5 (wlc-triss-1)

wlc-triss#                sh redundancy
Redundant System Information :

------------------------------
       Available system uptime = 4 weeks, 5 days, 2 hours, 30 minutes
Switchovers system experienced = 0
              Standby failures = 0
        Last switchover reason = not known

                 Hardware Mode = Duplex
    Configured Redundancy Mode = SSO
     Operating Redundancy Mode = SSO
              Maintenance Mode = Disabled
                Communications = Up

Current Processor Information :
------------------------------
               Active Location = slot 2
        Current Software state = ACTIVE
       Uptime in current state = 4 weeks, 5 days, 2 hours, 30 minutes
                 Image Version = Cisco IOS Software, IOS-XE Software, 5700 Series Wireless LAN Controller Software (CT5760-IPSERVICESK9-M), Version 03.06.03.E RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Wed 26-Aug-15 15:
               BOOT = flash:ct5760-ipservicesk9.SPA.03.06.03.E.152-2.E3.bin;
        Configuration register = 0x201 (will be 0x102 at next reload)

Peer Processor Information :
------------------------------
              Standby Location = slot 1
        Current Software state = STANDBY HOT
       Uptime in current state = 4 weeks, 5 days, 2 hours, 27 minutes
                 Image Version = Cisco IOS Software, IOS-XE Software, 5700 Series Wireless LAN Controller Software (CT5760-IPSERVICESK9-M), Version 03.06.03.E RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Wed 26-Aug-15 15:
               BOOT = flash:ct5760-ipservicesk9.SPA.03.06.03.E.152-2.E3.bin;
        Configuration register = 0x201 (will be 0x102 at next reload)

0 REPLIES 0
Content for Community-Ad