WLC 7500 v8.0.110 Native VLAN ID text box not present in web interface

[stephanecapdevert]

In web interface on my WLC 7500 v8.0.110, i don't have the  Native VLAN ID text box when i configure the flexconnect on LAP.

I test with IE9, FIREFOX and Google Chrome.

I can configure this parameter in CLI but not in GUI.

Any idea ?

For information, i have another WLC (virtual) in version 7.6 and the Native VLAN ID text box is present with the same browser.

[julien.pasquier]

I have the same problem with WLC 2504 v8.0.110 but only with AP 1702.

Anyone has a solution?

Is a software upgrade needed?

[Freerk Terpstra]

You both hitting bug CSCus64073. The workaround for now is to untick vlan support and tick it back. When you do that, the field will be shown again.

[julien.pasquier]

Thanks for the infotmation but the untick/tick VLAN Support (in the FlexConnect tab) does not work for me, even if I click on apply between the two and after.

[Freerk Terpstra]

In that case I would advise you to make the changes on the CLI until the bug has been resolved in the next maintenance release.
 

(Cisco Controller) >config ap disable <APName>
(Cisco Controller) >config ap flexconnect vlan native <vlanid> <APName>
(Cisco Controller) >config ap enable <APName>

[julien.pasquier]

OK, thanks for the CLi commands.

Julien