cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
494
Views
15
Helpful
2
Replies

WLC: 802.11n/ac - enabling both modes (11n and 11ac) or only 11ac?

HOLGER HAHN
Beginner
Beginner

In "802.11n/ac (5 GHz) Throughput" configuration should I enable only 11ac mode or 11n mode, too?
Most of our notebooks are newer models with 11ac capabilities.

WLC 5508 (version 8.5.171.0)
AP only AIR-AP2802I-E-K9

1 ACCEPTED SOLUTION

Accepted Solutions

Sandeep Choudhary
VIP Mentor VIP Mentor
VIP Mentor

You have to enable 802.11n if you want to use 802.11ac.

 

Info: If you disable 802.11n, the 802.11ac radio is also disabled.

 

Regards

Dont forget to rate helpful posts

View solution in original post

2 REPLIES 2

Sandeep Choudhary
VIP Mentor VIP Mentor
VIP Mentor

You have to enable 802.11n if you want to use 802.11ac.

 

Info: If you disable 802.11n, the 802.11ac radio is also disabled.

 

Regards

Dont forget to rate helpful posts

HOLGER HAHN
Beginner
Beginner

Thank you for the quick answer.

This is what I didn't found in the guides...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: