11-15-2013 01:01 AM - edited 07-04-2021 01:16 AM
Hi,
I have two 4500x in VSS, in the first Cat4500x there is the WLC Primary and in the second Cat4500x there is the WLC-HA.
Both WLC must be on the same etherchannel or can be in a different ethernchannel?
Regards..
Mirko Severi.
11-15-2013 01:48 AM
Configuring Link Aggregation (or LAG) in a WLC(4400/5508) is equivalent to configuring Etherchannel. It's recommended to use LAG if, for example, your WLC is connected to a 2975 or 3750/3750-E switch stack or a 6500VSS.
Enabling Link Aggregation (LAG)https://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60mint.html#wp1277652
https://supportforums.cisco.com/docs/DOC-23515
Regards
